For self-ignition compression diesel engine, PETRONAS Diesel EURO 2M is a high cetane index fuel designed for use in low and high speed self ignition compression engines to provide dependable and smooth operation. It has the proper viscosity suitable for critical fuel injection systems to provide maximum protection against wear and leakage. Also suitable for industrial purpose especially for direct burning i.e. boiler, furnace, dryer, etc.
- May release Hydrogen Sulfide (H2S) gas which may be fatal if inhaled.
- Combustible Hydrogen Sulfide (H2S) gas may cause irritation to eyes.
- Prolonged or repeated skin contact may be harmful.
- If swallowed, DO NOT induce vomiting. May cause chemical pneumonitis.
|PROPERTIES||GUARANTEED LEVEL||TEST METHOD|
|Colour (ASTM)||-||2.5||MS 2010 / ASTM D1500 / D6045|
|Ash, mass %||-||0.01||MS 2013 / ASTM D482|
|Cloud point, °C||-||19.0||ASTM D2500 / D5772|
|Flash Point, °C||60||-||MS 686 / ASTM D93|
|Kinematic Viscosity @ 40°C, mm˛ / s||1.5||5.8||MS 1831 / ASTM D445|
|Copper Corrosion (3h at 100°C)||-||1||MS 787 / ASTM D130|
|Water by Distillation, vol%||-||0.05||MS 1800 / ASTM D6304 / D95|
|Sediment by Extraction, wt%||-||0.01||MS 790 / ASTM D473|
|Carbon residue on 10% bottoms, wt%||-||0.20||MS 962 / ASTM D189 / D4530|
|Density at 15°C, kg/L||0.810||0.870||MS 1893 / ASTM D1298 / D4052|
|Acid Number, mgKOH/g||-||0.25||MS 2011 / ASTM D664 / D974 / D2624|
|Electrical conductivity, pS/m||50||-||MS 1889 / ASTM D2624|
|MS 1890 / ASTM D976 / D4737
MS 1895 / D613 / D6890 / IP498
|Physical distillation at 95% recovered volume, °C
Simulated distillation at 95% recovered mass, °C
ASTM D2887 / D86
|Total Sulphur, mg/kg||-||500||MS 1891 / ASTM D4294 / D2622 / D5453 / D7039 / D5950|
|Lubricity, μm||-||460||MS 1892 / ASTM D6079|
This diesel meets the following specifications:
- SIRIM MS 123:2005 (AMD. 1) 3rd Revision